Products > Drill rigs and rock drills > Underground drill rigs >
Production drill rigs, tophammer
Sandvik production drill rigs are designed to drill straight and accurate holes up to 54 meters in length with mechanized rod handling. Equipped with powerful hydraulic rock drills on sturdy, well-stabilized feeds, they have advanced ergonomic control systems that automate many of the routine drilling functions, raising productivity dramatically. The choice of rigs ranges from small manually operated models to large, almost totally automated production boosters.
Production drill rigs
Sandvik production drill rigs are renowned for accurate hole placement and very high penetration rates. With powerful hydraulic rock drills and fully mechanized rod handling, they can be equipped with laser guidance and various levels of automation depending on the needs of the customer and model type. Robust and extremely reliable, they achieve very high productivity at low total cost.
Models
Former model
(Tamrock)
Min. drift size m*
Max. drift size (w x h) m*
Hole
length up to m
Hole size
mm
**
Width
mm
Tramming height
mm
Rock drill
DL311
DL310
Solo 5-5C
Solo 5-7C
3.2x3.2
5.3x4.2
38
64-89
1990
2830-3100
HL 710
DL321
DL320
Solo 5-5F
Solo 5-7F
3.1x3.1
5.3x4.2
38
64-89
1900
2920-3450
HL 710
DL331
DL330
Solo 5-5V
3x3
6.8x4.6
23
51-64
1875
2100-3100
HLX 5
DL411
DL410
Solo 7-7C
Solo 7-10C
Solo 7-15 C
3.6x3.6
5.4x4.7
54
89-127
2240
2950-3200
HL 1010
HL 1560T
DL421
DL420
Solo 7-7F
Solo 7-10F
Solo 7-15F
3.6x3.6
5.4x4.7
54
64-127
2290
3150-3700
HL 710
HL 1010
HL 1560T
DL431
DL430
Solo 7-7V
3.2x3.2
5.3x5.3
38
64-89
2240
2460 - 3200
HL 710
* = depending on feed length
**= depending on rock drill
Low profile production drill rigs
Sandvik low-profile (LP) production drill rigs are designed to work in sections with headroom as low as 3,0 m when used in a vertical application. Equipped with a highly maneuverable boom, powerful hydraulic rock drill and fully mechanized rod handling, they enable accurate hole placement and very high penetration rates, giving much higher productivity at lower total cost.
Models
Former model
(Tamrock)
Min. drift size m
Max. drift size m
Hole length m
Hole size
mm
Width
mm
Height
mm
Rock drill
DL230L
Solo LP-126 LC
3x3
4.6x4.6
18
51-64
2250
1400
HLX5
Narrow vein production drill rigs
Sandvik narrow vein drill rigs are designed to work in narrow vein sections. These drill rigs have optimum drilling coverage and performance, as well as good operator and maintenance ergonomics. They are designed with maximum safety and productivity in mind, resulting in value added benefits for the end user. They are typically used in gold mining for development and production, and offer coverage of up to 26mē.
Models
Former model
(Tamrock)
Min. drift size m
Max. drift size m
Hole length m
Hole size
mm
Width
mm
Height
mm
Rock drill
DL210
Quasar 1L
2.7x2.7
5.6x3.8
20
51-64
1290
2150
HL510
DL230
Tamrock Quasar Combi
3.0x3.0
5.6x4.3
23
51-64
1340
1950
HL510