Products > Conveyors and components >
Dust suppression and loading sections

Sandvik dust suppression systems offer a unique and environmentally friendly way to control dust emissions at conveyor loading and transfer points. Quiet, efficient, water-free, easy to maintain and very cost-effective, they use less than 500 watts of electricity to capture around 95 % of airborne dust particles. The dust is then made to rejoin the product and instead add value to the process.

  • Dust suppression at loading and transfer points

Sandvik HX410 dust suppression systems exploit the principle of ionization to deliver a positive charge into airborne dust particles. Once charged, the particles are attracted to grounded surfaces including the system’s stainless-steel casing and the product on the belt. Suitable for use with a wide range of materials, the HX410 system is available in a range of standard sizes and can be tailored for almost any conveyor.

ModelsFormer nameBelt width
mm		Application areasMaterials
HX410Roxon Clear400-1400
  • quarries, sand & gravel pits
  • mines
  • steel works
  • cement and glass works
  • foundries
  • pulp and paper mills
  • wide variety of aggregates (basic and acid)
  • limestone
  • burnt limestone
  • kaolin
  • iron ore / pellets
  • sinter
  • coke
  • cullet
  • phosphates
  • potash

  • Loading section components

Proper selection of the right components for loading points plays an important role in the smooth operation of belt conveyors. Sandvik loading section components are specially designed to make it easy for you to tailor your loading sections to suit your needs.
ModelsBelt width
mm
Skirt board sealing500-1600
Sealingless loading650-1400
Supporting elements500-2000



© Sandvik Mining and Construction Internet Latest update: 02/05/2009 09:09:37 AM

Site map | Contact us | Send this page | Print this page | Comment this page